This is a presentation page in English of N.A Tecnologia. The complete website is available in Portuguese, to visit it click here.

Mission
To Provide innovative solutions of information technology to engineering companies with quality care and services, cooperating to the success of our customers and partners.

About us
Founded in late 1992, we are an independent and a privately owned company, leader in providing innovative technology solutions and services to the engineering companies and industries in Brazil and South America. We provide solutions that meet our clients’ immediate demands and support their long-term goals. By surveying the marketplace and continually listening to our clients and continuous education of our staff, we are able to provide our clients with an added value in the form of know-how on the state of the technologies.

Our Products
  N.A. products are used around Brazil by plant owners, nearly every major engineering companies and many others organizations.   
   
 
 

TRIFLEX


Performs static and dynamic piping stress & flexibility analysis. The program computes and compares stresses according to numerous user selected national and international piping codes and rotating equipment standards.

 

More at

 
 
 

ROHR2


AROHR2 is the worldwide used standard tool for Pipe static and Structural framework analysis, covering a variety of specifications like ASME, EN, CODETI, STOOMWEZEN D1101, KTA, FDBR and ISO 14692.

The program system ROHR2 is equipped by a range of additional features enhancing the engineer’s daily job, as there are FEM analysis (ROHR2FESU), isometric capabilities (ROHR2ISO) and a wide range of interfaces covering the leading CAD/CAE systems.

ROHR2 is used by generations of engineers doing their jobs in power plants, nuclear power engineering, chemical industry, gas piping and technical control authorities.

 

More at

 
 
 

AFT Fathom


AFT Fathom is fluid dynamic simulation software for engineers, used to calculate pressure drop and flow distribution in liquid and low velocity gas piping and ducting systems. Particularly useful for: pipe sizing, pump sizing and selection, simulating system operation and component interaction, evaluating heat transfer in pipes and heat exchangers and troubleshooting existing systems to determine the cause of operational problems.

  • EXtended Time Simulation (XTS) - model dynamic system behavior;
  • Goal Seek and Control (GSC) - automate the identification of input parameters that will yield desired output values and simulate control functions within systems;
  • CoST (CST) - calculate the cost of pipes and components within your system;
  • Settling Slurry (SSL) - model the effects of pumping fluids containing settling solids;
  • Non-settling Slurry (NSL) - address the viscosity and frictional changes associated with pumping non-settling solids and a variety of other non-Newtonian fluids.

More at


 
 
 

AFT Arrow


AFT Arrow is a fluid dynamic simulation tool used to calculate pressure drop and flow distribution in gas piping and ducting systems. Particularly useful for: pipe and duct sizing, relief valve sizing and system calculations, compressor and fan sizing and selection, control valve sizing and selection, simulating system operation and component interaction, choked flows calculations, evaluating pipe insulation and heat transfer in pipes and heat exchangers and troubleshooting existing systems to determine the cause of operational problems.

Extend AFT Arrow's modeling capabilities with two add-on modules:

  • Goal Seek and Control (GSC) - automates determination of input to achieve specified output & simulate control functions
  • CoST Estimation CST - calculate the cost of pipes and components

More at

 
 
 

AFT Mercury


AFT Mercury TM is a software tool used to intelligently size piping and ducting systems to minimize cost. It offers a dramatic improvement to the traditional design process. Built on the advanced flow analysis and system modeling capabilities of AFT Fathom™, AFT Mercury can simulate your piping system in complete detail. Particularly useful for: minimizing the initial cost of your system, minimizing the life cost of your system and meeting specific design parameters of your system including minimum pipe weight, volume or surface area.

 

More at

 
 
 

AFT Impulse


AFT Impulse is a fluid dynamic simulation tool used to calculate pressure transients in piping systems caused by waterhammer. Particularly useful for: ensuring that pressure extremes are within design allowables, sizing and locating surge suppression equipment, determining imbalanced pipe forces and sizing structural supports and troubleshooting existing systems to determine the cause of operational problems.

 

More at

 
 
 

AFT Titan


AFT Titan™ is a software tool used to intelligently size piping and ducting systems to minimize cost. It offers a dramatic improvement to the traditional design process. Built on the advanced flow analysis and system modeling capabilities of AFT Arrow™, AFT Titan can simulate your piping system in complete detail. Particularly useful for: minimizing the initial cost of your system, minimizing the life cost of your system and meeting specific design parameters of your system including minimum pipe weight, volume or surface area.

 

More at

 
 
 

AFT SteamCalc


Thermophysical properties for water, steam and steam/water mixtures with tabular and graphical output.

 

More at

 
 
 

AFT Engineering Utility Suite


A suite of eight utilities including; incompressible and compressible flow pipe sizing, convective heat transfer coefficient calculator, nozzle, orifice and venturi sizing, Reynolds number calculator, friction factor calculator, thermal/fluid engineering unit converter, two-phase flow mapping.

 

More at

 
 
 

Chempak Property Database


Chempak provides a property database of up to 700 fluids and mixing capability to AFT Arrow, AFT Fathom and AFT Mercury. AFT Chempak Viewer allows the Chempak database to be used as a stand-alone application while AFT Chempak Add-in makes the database information accessible within Microsoft Excel spreadsheets.

 

More at

 
 
 

OptiPlant Configurator


It is a knowledge-based engineering application for optimizing plant layouts by automating 3D Modeling and Pipe Routing. Optiplant optimizes the plant layout through an iterative process that is fast, interactive, and involves multiple elements including equipment, piping, and structures. Once the process is complete, the deliverables include drawings, reports, and MTO’s. Best of all, the data can be carried to the next stage and is not thrown away.

 

More at

 
 
 

Pipe Router (Microstation)


It provides automatic cost-driven 3-D pipe routing for both FEED (Front End Engineering and Design) and EPC project phases. This expert system enables engineers to cost optimize their designs, reduce the man-hours and reduce the quantity of material on a project. Rack design, equipment layout and MTOs can be fixed earlier providing a significant schedule reduction over the whole EPC phase of a project.

 

More at

 
 
 

Pipe Router PDMS


It provides automatic cost-driven 3-D pipe routing for both FEED (Front End Engineering and Design) and EPC project phases. This expert system enables engineers to cost optimize their designs, and dramatically reduce the man-hours on a project. Rack design, equipment layout and MTOs can be fixed earlier providing a significant schedule reduction over the whole EPC phase of a project. This version has been developed to run within the Aveva PDMS product.

 

More at

 
 
 

Pipe Support Optimizer


It is a fully integrated stress analysis, support location, and design tool. With this product, users can eliminate the manual trial and error steps to determine optimal support locations. PSO allows concurrent engineering during the early piping design phase. The program requires the target piping data and relevant plant information (structural steel, equipment, neighboring piping, trays, ducts, walls, floors, etc.) as input. The 3D Piping & Plant model can be read directly from ASD Pipe Router or imported from Intergraphs PDS and CadCentres PDMS Plant Design Systems.

 

More at

 
 
 

Foundation3D


It’s a spread and combined footing analysis/design tool that completes soil or pile supported foundation with minimal input. This tool is perfect for designing foundations for industrial equipment such as horizontal exchangers and vessels, vertical vessels or towers, pipe racks and other plant supports.

 

More at

 
 
 

Mat3D


It is a software for project and analysis of structural blocks of foundation, with few inputs it analyzes/projects of the ground until the sustentation base. Mat3D is perfect for multiple shipments, varied beams of forms and sizes. Software can project, analyze, generate sketches and sections with few and easy steps.

 

More at

 
 
 

VPHybridCAD - Raster/Vector


Combines the benefits of raster-to-vector conversion with intuitive editing and design of both raster and vector objects. Even colored and gray scale drawings can be processed to secure pervasive workflows.

 

More at

 
 
 

ReviewInsight


Ticodi ReviewInsight is the first product to bring you a fully database-driven model comment tool which provides advanced recording of model comments, 2D markup, reporting and fully managed collaboration of model comments. ReviewInsight allows engineers, designers and professionals to communicate, collaborate and comment easily, either within the same office location or on a global level.

ReviewInsight stores model comments in one central database, therefore making your model comments easier to manage comprehensively. ReviewInsight allows the capture of a model, from any application, including all CAD packages, thus allowing easy visual recognition of model comments. The ergonomically designed Graphical User Interface (GUI) of ReviewInsight allows for storing, viewing, markup, editing, approving and reporting of all model comments from within one main application window.

 

More at

 
 
 

Cortona3D RapidAuthor


Cortona3D software solutions streamline the authoring of technical documentation so aftermarket parts, service, support and training is produced from existing CAD in one third of the time at 12.5% of cost.
The inclusion of interactive 3D content such as simulations of procedures and exploded views of parts across Operations/Maintenance Manuals, Spare Parts Lists, eLearning Applications and Structured User Feedback improves the quality and the usability of these deliverables which increases service revenues, workforce productivity and reduces errors.

 

More at


 
 
 

Eagle3D PDF to NWC Converter


3D Apps LLC has developed an advanced 3D PDF convert tool that allows users to convert 3D PDF file into Navisworks file format with metadata without the need of installing Navisworks..

 

More at


 
 
 

Elecdes


Elecdes is the 2D electrical CAD design module of EDS, used for the production of intelligent circuit diagrams including; electrical schematic diagrams, wiring diagrams, 1 line diagrams, cable block diagrams and loop diagrams. Elecdes has a rich set of CAD drawing and database tools to automate and speed the production of electrical circuit diagrams, and comes with standard symbol and manufacturers parts libraries.

 

More at

 
 
 

Paneldes


Paneldes Panel is the 3D CAD design module of EDS used for the creation of Electrical Panels. Paneldes software facilitates and enhances the construction of electrical models and electrical panel general arrangements, and performs wire routing, filling, and wire length calculations, as well as interference analysis and materials reporting.

Paneldes Raceway is the 3D CAD design module of EDS used for the creation of Plant Raceway models. Paneldes software performs cable routing, cable filling and cable length calculations, as well as interference analysis and materials reporting.

 

More at

 
 
 

Instrument Manager


A new "data-centric" Instrument design and documentation system. Used for the automated production of instrumentation documents such as, Instrument Data Sheets, Loop Diagrams, Hook up Diagrams, Wiring /Terminal Strip diagrams, Instrument Index report, Bill of materials report, Cables Schedule report, Interconnection reports and many other documents. Live linking with AutoCAD P&ID software.

 

More at

 
 
 

Support


 
After a attempt to resolve any issues themselves, users are encouraged to use our support service, including e-mail or remote access. In addition, all input files and a description of the problem can be sent to us by using our website support area.
Training

Training is offered through the following 3 programs:

  • OPEN TRAINING
    Basic program training in groups of 1 to 6 persons per course, coming from different companies. Training venue is our corporate center in São Paulo.
  • "IN COMPANY" TRAINING
    Groups of up to 6 participants allows an effective personalized training. The training can be adapted to your personal need. Training venue is the trainee's company office.
  • ONLINE TRAINING CENTER
    In case of urgent questions or project related needs which do not justify the organization of a complete one or two-day training we propose internet based training. The main benefits of Internet based training are travel/accommodation costs and time savings.


Seminars
Our customers can check our list of planned seminars which they would like to attend. We offer technical seminars at our offices or via WebEx. The seminars review fundamental theory, basic through advanced techniques and hands-on modeling using our software products.

Webinars
We offer introductory Webinars about our software. These presentations are one hour long and are ideal for people who are evaluating our products.

Our customers
 
We can be your representative
If you are looking for a company to deal with your products in Brazil and/or South America please Click here.
Contacts
N.A Tecnologia e Sistemas
Rua Cincinato Braga, 68 -Cj.33 - Bela Vista
São Paulo - SP - Brazil CEP: 01333-010
Tel: + 55 11 2574-6195
na@natecnologia.com.br
Map of localization
Call me!